Colorants for UV-LED Resin 12 Basic Jewel Color Set

SKU: 403295
This product is unavailable

・12 new basic jewel colors are in a set
・A fine nozzle avoids over dropping pigment
・Mix well with UV-LED resin for high transparency

【Materials can be used with】
○ UV-LED resin, 2 epoxy resins
△ Silicone, Polyurethane resin
*test before use.
☓ Raw clay, water, ethanol, water base varnish, oil base varnish

Shake a bottle well before use.

    • Put 1 – 2 drops into resin and stir it well with a stick.
      Add another drop if needed for darker.
        • Pour the resin to the mold and cure it under the LED light.


          【Read before use】
          • Drop a proper amount and stir it well. If bubbles appear, remove them before curing.
          • Too much pigment cannot cure the resin.
          • Avoid direct contact with skin. If it occurs, remove with a tissue and wash with soap and water.
          • Be careful not to get colored to clothes, furniture. If it does, it might come out with dehydrated ethanol depending on the material.
          • Remove overflowed colors with a tissue before closing the cap.
          • Ventilate a room.
          • Tighten a cap properly after use.


          Pack Size: 12 bottles each 2ml
          Bottle Size: 18 mm in a diameter×44 mm height