Mini Dice Silicone Mold (8mm)

4.7
Rated 4.7 out of 5 stars
6
€7,95
SKU: MDSM

Mini Dice Silicone Mold is a S&T original designed silicone mold made with thick, solid and durable silicone.

You will either need a syringe to use with this mold, or you can use UV resin to coat both sides, then join together to finish up with the syringe.


This is our newest version of dice molds!


The structure of the mold is made in a way that it will not deform over time and the silicone will not turn dull with multiple use. It is not thin and filmsy like other dice molds on the market.


Our dice molds can be placed into a vaccum chamber for bubble-free or use with our epoxy resin 3:1 to achieve bubble-free. 


Pack Size: 1 piece
Measurements: 8mm dice
Material: Silicone

 

 

4.7
Rated 4.7 out of 5 stars
Based on 6 reviews
Total 5 star reviews: 4 Total 4 star reviews: 2 Total 3 star reviews: 0 Total 2 star reviews: 0 Total 1 star reviews: 0
100%would recommend this product
Customer-uploaded media carousel. Press left and right arrows to navigate. Press space or enter to open more details.
Slide 1 selected
6 reviews
  • AN Profile picture for Arieth N.google logo
    Arieth N.
    Verified Buyer
    I recommend this product
    Rated 4 out of 5 stars
    11 months ago
    Would be better with instructions and rubber bands

    I love it! I really do, its *almost* perfect.

    It just comes with zero instructions on how to use it.

    How much resin do i need? I was using the a b mix kind, so knowing how much is just a little important. I watched the video after my attempt, because I wanted to see how bad a newbie like me was going to do.

    I figured out the rubber band trick only because I've done NerdECrafter's not another crap kit and needed them for that to not leak. I already had some pipettes things to try to fill the holes, kinda worked.

    I am not the happiest, i think i used like 6 ml and it was to much? poured the rest into the wings i also bought.

    for my next attempt I plan on filling each side and letting that set before putting it together.

    the video though was kinda nice, yall showed inperections and how to deal with it.

    I just really wish that pref with the dice you get written instructions for how much you need for the set, or on the website you have somewhere easy access of how much each mold needs.

    But i do love it and going to try again

    QualityRated 5.0 on a scale of 1 to 5
    Ease of UseRated 3.0 on a scale of 1 to 5
  • EA
    Elizabeth Ann R.
    Verified Buyer
    I recommend this product
    Rated 4 out of 5 stars
    1 year ago
    Adorable? Yes. Playable? Eh…

    This is one of the most adorable molds I have in my collection. The dice are unimaginably small! The mold is really well-made, and of a very high shore silicone. I love the way the two halves come together specifically at the seams of the dice so they don’t appear quite as prominent, and the fact that it opens in half to begin with is great if you want to put something small into these dice. I even made a teeny tiny liquid core! That said, I have yet to get a D4 where the numbers have lined up correctly and aren’t halfway off the face, and there’s next to no margin of error when it comes to how much pressure is needed to hold the mold together. It definitely needs something, because otherwise the mold just comes apart and resin leaks everywhere. I’d say you could avoid that by using UV resin and just holding it, but the mold is a little too opaque for UV light to penetrate—my results were rough and tacky even with an 86w UV lamp. So you need to rubber band it together to use with 2-part resin, but if you use too much pressure, your dice will have a ridge kind of like a little muffin top along the seam. And the number wells oh really just etched, so they’re not deep enough to support sanding to correct it. (Not that you would want to try and sand something so tiny anyway!) I found good success with large hair elastics, but it would be nice if something perfectly sized were included with the mold. I’m happy with my full priced purchase, but I’d recommend buying it on sale or at…

    QualityRated 4.0 on a scale of 1 to 5
    Ease of UseRated 4.0 on a scale of 1 to 5
  • OC
    Odette C.
    Verified Buyer
    I recommend this product
    Rated 5 out of 5 stars
    2 years ago
    Mini means tiny

    The mold is easy to use with the right equipment. I chose UV resin and a pipette. The UV resin worked well, the pipette was too chunky and allowed too many bubbles to form. I’ll try with a needle to see if these can be reduced.

  • JE
    Jennifer E.
    Verified Buyer
    I recommend this product
    Rated 5 out of 5 stars
    2 years ago
    Mini Dice

    I love the mold. Wish the holes for filling were a bit bigger so that I can get rid of the air bubbles.

  • NW
    Norma W.
    Verified Buyer
    I recommend this product
    Rated 5 out of 5 stars
    3 years ago
    Great Quality

    Early delivery, great quality.

Reviews LoadedReviews Added