Save $23USD off shipping on all orders $150USD+, Free local shipping on orders $60USD+!*
Subscribe to our Disney Box and never miss a box!

Days : Hours Hrs : Minutes Min : Seconds Secs left to get April's Box!

Read how the Covid-19 situation is affecting us.

Gamer Polyhedral Dice Silicone Mold (Cap Molds)

USD $6.31
Calculated at Checkout
Pack Size:
1 piece or 7 pieces
15mm x 20mm
20mm x 22mm
20mm x 22mm
Gamer Polyhedral Dice Silicone Mold (Cap Molds)

Gamer Polyhedral Dice Silicone Mold is a S&T exclusive designed silicone mold, made with the finest silicone and is a super clear mold.

This is our newest version of dice molds!
This dice mold comes with 2 parts, the main dice and cap with the blank side number etched on it.
The main dice mold is made of softer silicone while the cap is made of hard silicone.

The structure of the mold is made in a way that it will not deform over time and the super clear mold will not turn yellow or dull with multiple use.
This is a flexible mold, easy to pop out your resin. This is also a shiny mold, so you don't need to glaze your final pieces.

This version of molds use food grade clear silicone and able to use in a vacuum! This allows greater durability and superb clarity.
It is normal to have slight tears around the opening of the molds after demolding, this will ease demolding and the tears will not show up on your finished pieces.

Features of the molds:

Standard 15mm dice mold
Sophie & Toffee font
Mix of sharp edge design
Clear platinum food grade silicone
Can be put in vacuum chamber
All numbers are included in the mold, the blank side number is on the cap with a key to guide placement
Works with UV resin as well as AB Epoxy resin
Suitable for beginners and everyone!

Note: These set of handmade dice molds are not intended for professional dice making use.
Dice might not be 100% perfect on all sides. Please consider this when purchasing.


How to care for your molds:

Do not use fingernails to demold
Do not torch over the molds
Do not pour resin which are not mixed well into the molds
(mixing in too much hardener will generate a lot of heat at once and will damage the molds)
Do not use fast cure resin, it may damage the molds and cloud the molds
Do not shine your UV light too close to the molds
Do not use too strong UV light (36W is good enough)
Use a mold releasing agent or soak in warm / soapy water before demolding D20 mold


We cannot be responsible for damages to the molds for improper usage as above.
Different brands of resin may not be entirely compatible with the molds.
For best results, use our S&T UV resin for silicone molds or S&T AB Epoxy resin.