Save $23USD off shipping on all orders $150USD+, Free local shipping on orders $60USD+!*
February Box is delayed. Shipping in February.

Days : Hours Hrs : Minutes Min : Seconds Secs left to get February's Box!

Shop our Clearance Sale! Save 50% off now.

Gamer Sharp Edge Polyhedral Dice Silicone Mold (16mm)

USD $10.38
SKU:
SCM-325
Shipping:
Calculated at Checkout
Pack Size:
1 piece or 7 pieces
Material:
Silicone
Measurements:
Standard 16mm
Gamer Sharp Edge Polyhedral Dice Silicone Mold (16mm)

This is a S&T exclusive designed silicone mold, made with the finest silicone and is a super clear mold.

This dice mold comes with 2 parts, the main dice and a lid with the blank side number etched on it.
Both the main dice mold and the lid are made of clear hard silicone.

The structure of the mold is made in a way that it will not deform over time and the super clear mold will not turn yellow or dull with multiple use.
This is a flexible mold, easy to pop out your resin. This is also a shiny mold, so you don't need to glaze your final pieces.

Note:
This version of molds use food grade clear silicone with a higher level of hardness. This allows greater durability and superb clarity.
However, it will not be as easy to demold compared to our soft silicone version.
It is normal to have slight tears around the opening of the molds after demolding, this will ease demolding and the tears will not show up on your finished pieces.

 

 

Features of the molds:

Standard 16mm dice mold
Wizard font
Sharp edge dice design
Clear platinum silicone
Can be put in vacuum chamber for heat less than 80 degrees Celsius
(however, note that high heat will deteriorate the molds faster)
All numbers are included in the mold, the blank side number is on the lid with an outline to guide placement
Works with UV resin as well as AB Epoxy resin
Suitable for beginners and everyone!

 

How to care for your molds:

Do not use fingernails to demold
Do not torch over the molds
Do not pour resin which are not mixed well into the molds
(mixing in too much hardener will generate a lot of heat at once and will damage the molds)
Do not use fast cure resin, it may damage the molds and cloud the molds
Do not shine your UV light too close to the molds
Do not use too strong UV light (36W is good enough)
Use a mold releasing agent or soak in warm / soapy water before demolding D20 mold

 

We cannot be responsible for damages to the molds for improper usage as above.
Different brands of resin may not be entirely compatible with the molds.
For best results, use our S&T UV resin for silicone molds or S&T AB Epoxy resin.

 

This is a S&T original design, please do not copy, only create.