Padico Sun Drop UV LED Resin 200g non-yellowing

Description

"Sun Drop" UV Resin for Molds is designed with use with silicone molds.  Improved UV-LED curing resin with excellent cost performance & new design.

Advantages of using this UV Resin:

✿ Cured with both LED light(405nm) and UV light(36W)
✿ Less yellowing* issue than previous UV resin.
✿ Good curing result with silicone mold.
✿ Cure starts in a second, and completely done in 30-120 seconds.
✿ Expose the light from top side & the bottom one for sure to cure inside of the resin.
✿ Minimize the warp of the resin in curing.
✿ Due to low heat shrinkage 4%, work well with open back bezels.
✿ Cure well under the sunlight.
✿ The surface of a cured item does not cause stickiness feeling.

*There may be a case of discoloration caused by aged deterioration.

How to use

✿ LED & UV light at 6W - 9W, cure within 30~120 seconds
✿ UV light at 36W, cure within 2-4 mins
✿ Under direct sunlight, cure within 30~120 seconds

Safety things to note: Use this product in a well ventilated room, wear a mask and gloves while working with resin.

Specifications

Pack Size: 200g

Two Layer Floating Shaker Oil is an exclusive blend from S&T to achieve the floating effect you see from your childhood toy.

Two different density of oils are pre-mixed to allow objects to float in between the oils.

More colors coming soon!