Puni Puni Squishy Gel 240ml
Sophie & Toffee New Puni Puni version Squishy Gel allows you to make gummy and squishy type of products!
It is preferred to use harder silicone molds with this product.
Some softer silicone molds might adhere to the gel when curing.
You can use a little of powder type of food coloring to mix in colors for this product.
Be careful not to mix too much pigment, as it will affect the curing of the gel.
Note: Acrylic Paint and Resin Pigment coloring cannot be used with this gel, the gel will not cure.
The mixing ratio for our Squishy Gel is A:B = 1:1
You will receive the A in 120grams and B in 120grams.
Apply a thin layer/ coat of vaseline oil onto the mold before pouring the silicone gel mix for easier de-molding once dry.
Please note the the squishy gel will have a slight sticky texture after dry, you can sprinkle some powder over the finished product.
Advantages of using our Squishy Gel:
- Much easier to cure as compared to other brands
- This version is made to Jiggle and it will be slightly sticky once dry
- Bubbles will dissolve on its own during the curing process
- Low odour
- Affordable
Estimated curing time in room 25-26 degree temperature: 6-8 hour with 24 hours max depending on weather, Cold season results may vary.
*** Our newer batches of AB Puni Puni Gel will all have a air tight seal over the opening of the container, this is to prevent leakage/ Spillage during air transit.
Use disposable kitchen towels to wipe away the gel and dispose, wash hands with soapy water.
Pack Size: 240g
Measurements: A - 120g, B - 120g (Product is by weight, the bottles may not be full, this also help prevent air pressure and forcing the liquid out during flight)
Watch the tutorial and review of this product:

Sophie & Toffee New Puni Puni version Squishy Gel allows you to make gummy and squishy type of products!
It is preferred to use harder silicone molds with this product.
Some softer silicone molds might adhere to the gel when curing.
You can use a little of powder type of food coloring to mix in colors for this product.
Be careful not to mix too much pigment, as it will affect the curing of the gel.
Note: Acrylic Paint and Resin Pigment coloring cannot be used with this gel, the gel will not cure.
The mixing ratio for our Squishy Gel is A:B = 1:1
You will receive the A in 120grams and B in 120grams.
Apply a thin layer/ coat of vaseline oil onto the mold before pouring the silicone gel mix for easier de-molding once dry.
Please note the the squishy gel will have a slight sticky texture after dry, you can sprinkle some powder over the finished product.
Advantages of using our Squishy Gel:
- Much easier to cure as compared to other brands
- This version is made to Jiggle and it will be slightly sticky once dry
- Bubbles will dissolve on its own during the curing process
- Low odour
- Affordable
Estimated curing time in room 25-26 degree temperature: 6-8 hour with 24 hours max depending on weather, Cold season results may vary.
*** Our newer batches of AB Puni Puni Gel will all have a air tight seal over the opening of the container, this is to prevent leakage/ Spillage during air transit.

Use disposable kitchen towels to wipe away the gel and dispose, wash hands with soapy water.

Pack Size: 240g
Measurements: A - 120g, B - 120g (Product is by weight, the bottles may not be full, this also help prevent air pressure and forcing the liquid out during flight)

Watch the tutorial and review of this product:
- CBColleen B.Verified BuyerI recommend this productRated 4 out of 5 stars3 weeks agoResin
Hi I haven't use it yet but I like the smaller bottles and I can't wait to is it.
QualityRated 5.0 on a scale of 1 to 5Poor ExcellentEase of UseRated 5.0 on a scale of 1 to 5Poor ExcellentWas this helpful? - CBColleen B.Verified BuyerI recommend this productRated 5 out of 5 stars1 month agoMy squishy
This product is great. Take your time when stirring but it work wonderfully
QualityRated 5.0 on a scale of 1 to 5Poor ExcellentEase of UseRated 5.0 on a scale of 1 to 5Poor ExcellentWas this helpful?