Moule en silicone exclusif pour dés polyédriques de joueur

4.3
Rated 4.3 out of 5 stars
9
€53,95 €75,95
SKU: GDM22-FS

Le moule en silicone Gamer Polyhedral Dice est un moule en silicone original conçu par S&T, fabriqué avec du silicone épais, solide et durable.

Voici notre toute nouvelle version de moules à dés !

Ces moules à dés sont livrés avec 2 ou 3 parties, le dé principal et le capuchon avec le numéro du côté vierge gravé dessus.

La structure du moule est conçue pour ne pas se déformer avec le temps et le silicone ne ternit pas après plusieurs utilisations. Il n'est pas fin et filmogène comme les autres moules à dés du marché.

Comme il se divise en deux ou trois parties, il est facile de créer des inclusions et de le démouler. La seule exception est le D8, que vous pouvez utiliser avec un bâton pour l'évider.

Nos moules à dés peuvent être placés dans une chambre à vide pour éviter les bulles ou utilisés avec notre résine époxy 3:1 pour obtenir un résultat sans bulles.

Caractéristiques des moules :

  • Solide et durable
  • Ne se déchire pas facilement
  • Démoulage facile
  • Clignotement minimal pour le nettoyage
  • Facile à encrer
  • Pas de vide au Cap

Pour de meilleurs résultats, utilisez notre résine UV-LED S&T Diamond ou notre résine époxy S&T AB 3:1.

Ce produit et ce design sont protégés par le droit d'auteur de Sophie & Toffee, tous droits réservés.

Taille du paquet : Un ensemble de 7 pièces
Matériau : Silicone
D4 : 20 mm
D6 : 15 mm
D8 : 20 mm x 25 mm
D10 : 20 mm x 25 mm
D-Percentile : 20 mm x 25 mm
D12 : 18 mm
D20 : 20 mm

4.3
Rated 4.3 out of 5 stars
Based on 9 reviews
Total 5 star reviews: 5 Total 4 star reviews: 2 Total 3 star reviews: 2 Total 2 star reviews: 0 Total 1 star reviews: 0
78%would recommend this product
Slide 1 selected
Write a Review (Opens in a new window)
9 reviews
  • WC Profile picture for Winsway Creations - Joanne & K.
    Winsway Creations - Joanne & K.
    I recommend this product
    Rated 5 out of 5 stars
    3 years ago
    Small but precise

    Whilst the D20 is smaller than other options we are finding that once clients have used it they say they appreciate ease the smaller size gives re table/shaker space. It is not for everyone, and that is normal for any mold

    We are repeat purchasers as the quality of the molds is worth the additional cost.

    Debubbling is about time and finding the right sized popper. We don't have a pressure pot. For us it has been about using a good quality resin, then to just spend the standing time, slow pour and debubble...

    QualityRated 5.0 on a scale of 1 to 5
    Ease of UseRated 4.0 on a scale of 1 to 5
    Was this helpful?
  • JR
    Jordan R.
    Verified Buyer
    Rated 3 out of 5 stars
    2 years ago
    D4, D6, D8 issues

    Overall the design of the dice molds are good except the for D4, D6, and D8. The D8 has issues where once set and most of the other molds are ready for de-molding the D8 is notoriously hard to remove from the mold and often requires more time in the mold. the D4 and D6 have an issue where there is no place for excess or overflow resin to go, so if you are using a resin isnt completely bubble free when pouring you will get voids at the top of the mold when using a pressure pot or vacuum pot; as the lids for the D4 and D6 molds push any and all excess resin out and leave zero room for the bubbles to be pushed out during pressure pot and to be refilled by resin. The rest of the molds are excellent, they are easy to use, easy to clean and easy to de-mold once set. the D4,D6, and D8 would benefit greatly from also being a 3 piece mold instead of the current 2 piece molds.

    QualityRated 3.0 on a scale of 1 to 5
    Ease of UseRated 3.0 on a scale of 1 to 5
    Was this helpful?
  • DC
    Deborah C.
    Verified Buyer
    I recommend this product
    Rated 5 out of 5 stars
    2 years ago
    Excellent Quality

    Beautifully made molds

    QualityRated 5.0 on a scale of 1 to 5
    Ease of UseRated 4.0 on a scale of 1 to 5
    Was this helpful?
  • JK
    Jennifer K.
    Verified Buyer
    I recommend this product
    Rated 5 out of 5 stars
    3 years ago
    Dice

    The molds are really good especially when you want to put something in your dice. Demolding is super easy as well. Only downside for me, they are smaller than expected. But nevertheless they are going to be used and i'm happy to have them.

    QualityRated 5.0 on a scale of 1 to 5
    Ease of UseRated 5.0 on a scale of 1 to 5
    Was this helpful?
  • RL
    Rene L.
    Verified Buyer
    I recommend this product
    Rated 5 out of 5 stars
    3 years ago
    Solid molds and fair price

    Shipment took 4 weeks to germany. there is an extra fee (Zoll) of 19€ at the postoffce.

    the d20 is too small, the rest of the set look very good. the price is fair.

    I recommend a mold seperating agent.

    I recommend this dice-set

    QualityRated 5.0 on a scale of 1 to 5
    Ease of UseRated 4.0 on a scale of 1 to 5
    Was this helpful?
Show More