Sophie & Toffee New Puni Puni version Squishy Gel allows you to make gummy and squishy type of products! This type of gels are less prone to snap or break with higher level of squish texture and will not break under stress unlikely other harder texture squishy gels where it will chipped and break under stress.
This gels are carefully thought through to achieve the best results and quality texture.
These gels are fully compatible with our Exclusive Sophie and Toffee Silicone molds. Be careful not to mix too much pigment, as it will affect the curing of the gel.
Note: Acrylic Paint and Resin Pigment coloring cannot be used with this gel, the gel will not cure.
The mixing ratio for our Squishy Gel is A:B = 1:1 You will receive the A in 120grams and B in 120grams.
Apply a thin layer/ coat of vaseline oil onto the mold before pouring the silicone gel mix for easier de-molding once dry.
Please note the the squishy gel will have a slight sticky texture after dry, you can sprinkle some powder over the finished product.
Advantages of using our Squishy Gel:
Much easier to cure as compared to other brands
This version is made to Jiggle and it will be slightly sticky once dry
Bubbles will dissolve on its own during the curing process
Low odour
Silicone based
Estimated curing time in room 25-26 degree temperature: 6-8 hour with 24 hours max depending on weather, Cold season results may vary.
*** Our newer batches of AB Puni Puni Gel will all have a air tight seal over the opening of the container, this is to prevent leakage/ Spillage during air transit.
Use disposable kitchen towels to wipe away the gel and dispose, wash hands with soapy water.
Our high quality transparent hand made molds are also compatible with Taba Squishy gel.
Pack Size: 240g Measurements: A - 120g, B - 120g (Product is by weight, the bottles may not be full, this also help prevent air pressure and forcing the liquid out during flight)
Watch the tutorial and review of this product:
Description
Sophie & Toffee New Puni Puni version Squishy Gel allows you to make gummy and squishy type of products! This type of gels are less prone to snap or break with higher level of squish texture and will not break under stress unlikely other harder texture squishy gels where it will chipped and break under stress.
This gels are carefully thought through to achieve the best results and quality texture.
These gels are fully compatible with our Exclusive Sophie and Toffee Silicone molds. Be careful not to mix too much pigment, as it will affect the curing of the gel.
Note: Acrylic Paint and Resin Pigment coloring cannot be used with this gel, the gel will not cure.
The mixing ratio for our Squishy Gel is A:B = 1:1 You will receive the A in 120grams and B in 120grams.
Apply a thin layer/ coat of vaseline oil onto the mold before pouring the silicone gel mix for easier de-molding once dry.
Please note the the squishy gel will have a slight sticky texture after dry, you can sprinkle some powder over the finished product.
Advantages of using our Squishy Gel:
Much easier to cure as compared to other brands
This version is made to Jiggle and it will be slightly sticky once dry
Bubbles will dissolve on its own during the curing process
Low odour
Silicone based
Estimated curing time in room 25-26 degree temperature: 6-8 hour with 24 hours max depending on weather, Cold season results may vary.
*** Our newer batches of AB Puni Puni Gel will all have a air tight seal over the opening of the container, this is to prevent leakage/ Spillage during air transit.
Cleaning Instructions:
Use disposable kitchen towels to wipe away the gel and dispose, wash hands with soapy water.
Our high quality transparent hand made molds are also compatible with Taba Squishy gel.
Pack Size: 240g Measurements: A - 120g, B - 120g (Product is by weight, the bottles may not be full, this also help prevent air pressure and forcing the liquid out during flight)
